Restoration phone support available around the clockCall (866) 736-0707

Source of the water

Pollock, MO

Slab Leak Water Damage in Pollock, MO

Our guided-recovery team locates moisture from slab leaks and dries flooring, walls, and contents affected by water rising through the foundation.

  • Restoration phone support around the clock
  • Residential and commercial loss response
  • Measured extraction, cleanup, and drying
  • One restoration team from assessment to dry standard

Call (866) 736-0707Browse services

Signs to look for

When to call us for slab leak damage

With clear direction, if you notice any of these problems, call us before water has more time to spread into nearby materials.

A warm spot on a tile or wood floor

From cleanup toward a fresh start, heated water escaping under the concrete warms the slab above it.

You hear water running with everything turned off

With clear direction, stand in a quiet room at night and listen at floor level.

The water heater cycles constantly

As the property gets back on track, a leak on the hot water line or a recirculation line pulls heated water out around the clock.

New cracks in the slab or in floor tile

For a smoother recovery, water changes the soil under a slab, and movement shows up as cracked tile or a new line in the concrete.

Baseboards and door casings are damp along one wall

As the property gets back on track, water in the slab wicks up into the bottom of the drywall and the trim.

Dark or damp grout in a line across the floor

From cleanup toward a fresh start, grout is the most permeable part of a tile floor, so moisture appears there first.

What happens

How we handle slab leak damage

Our guided-recovery team adjusts the work to what got wet, how far the water traveled, and which materials can be saved.

Confirming the water is coming from below

From cleanup toward a fresh start, we rule out the roof, the walls and every fixture in the area first.

Locating the leak so nobody cuts on a guess

For a smoother recovery, meter readings, surface temperature differences and a thermal imaging camera narrow the area before any concrete is considered.

Marking the affected slab area and its edges

From cleanup toward a fresh start, the wet boundary gets drawn on the floor and recorded in a map.

Extraction of the water that came up through the slab

For a smoother recovery, standing water, wet carpet and pad, and water sitting under a floating floor all get removed.

Flooring removal only where it has to come up

For a smoother recovery, tile with sound thinset and grout often stays down.

Wall base and cavity drying where water wicked up

From cleanup toward a fresh start, drywall pulls moisture up from a wet slab by wicking, so the bottom band of the wall gets metered and dried.

Talk with a restoration specialist

Water loss in Pollock, MO?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (866) 736-0707

What to expect

What to expect from our guided-recovery team

From cleanup toward a fresh start, here is how we usually handle slab leak damage near Pollock, MO.

  1. 1

    Tell us what is warm, wet or louder than it should be

    From cleanup toward a fresh start, those three symptoms point almost anywhere else in a building except under the floor.

    Your call
  2. 2

    Shut the water heater down safely to test the hot side

    From cleanup toward a fresh start, turn the water heater off first, meaning the gas control to pilot or off, or the breaker off.

    +10 minutes
  3. 3

    Ruling out everything above the slab first

    From cleanup toward a fresh start, on arrival the lead checks fixtures, walls and the ceiling in the affected area.

    On arrival
  4. 4

    The wet area mapped and marked on the floor

    As the property gets back on track, a moisture meter, surface temperature differences and the damp line at the flooring edge set the boundary, and it gets drawn and photographed.

    First hours on site
  5. 5

    Flooring opened where it must be, water extracted

    From cleanup toward a fresh start, wet carpet and pad, swollen laminate and failed adhesive come up in the marked area.

    Same day
  6. 6

    Reroute or open the slab, and what each means for drying

    From cleanup toward a fresh start, your plumber makes that call, and we explain the drying consequence of both.

    Plumber's day
  7. 7

    Equipment set on the slab after the repair

    As the property gets back on track, air movers over the concrete, Professional dehumidifiers taking moisture out of the air, and negative pressure under floating assemblies where the system allows it.

    After the repair

Understanding the cost

What can affect the price

With clear direction, we explain the recommended work and price before you approve the job. With clear direction, these examples show what may change the estimate.

Common situationWhat the estimate may includeTypical range
Leak location survey with meter readings and thermal imagingFor a smoother recovery, national estimate. From cleanup toward a fresh start, the right first step before anyone considers opening concrete.$250 to $600
Slab leak drying, one room, flooring stays downFor a smoother recovery, national estimate. As the property gets back on track, extraction, slab drying and four to six days of equipment with daily readings.$1,200 to $3,500
Slab leak with flooring removal and slab drying across two roomsFor a smoother recovery, national estimate. From cleanup toward a fresh start, flooring and pad removal, wall base drying and extended slab drying.$3,000 to $8,000
Slab leak cleanup where cabinetry and wall bases are involvedFor a smoother recovery, national estimate. As the property gets back on track, toe kick voids, wall bases and trim in addition to the slab itself.$1,500 to $5,000
Slab drying priced by affected area, clean waterFor a smoother recovery, national estimate. From cleanup toward a fresh start, measured wet area of the slab rather than the whole room.$3 to $7 per square foot
Slab moisture documentation before new flooring is installedFor a smoother recovery, national estimate. For a smoother recovery, our readings against a dry reference area, as supporting evidence alongside the installer's own ASTM testing.$150 to $400
Your plumber's slab leak repair, reroute or open the slabNational estimate for your plumber's recovery guide, listed so the total is not a surprise.$1,000 to $6,000
  • How long the leak ran before it was found
    With clear direction, slab leaks are usually found late, and every week widens the saturated area under the floor.

  • Hot side or cold side
    As the property gets back on track, a hot water line leak adds heat and humidity to the space and shows itself sooner as a warm spot.

  • Flooring type over the slab
    For a smoother recovery, tile with sound thinset often stays down. With clear direction, glued hardwood, laminate and carpet with pad usually come up, and removal is labor plus disposal.

  • How much flooring has to be removed
    With clear direction, removal is priced by area, and the marked wet boundary is what keeps it honest.

  • Whether wall bases wicked moisture up
    For a smoother recovery, if the bottom band of drywall reads wet, trim comes off and that band gets dried or removed.

  • Concrete drying days
    From cleanup toward a fresh start, air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.

Why timing matters

What can happen when the area stays wet

As the property gets back on track, water can keep moving into nearby materials even when the surface looks dry.

A slab leak does not drain, it saturates

With clear direction, water under concrete has nowhere to go, so it soaks the soil and the slab continuously.

Concrete keeps releasing water after the leak stops

With clear direction, a saturated slab feeds moisture into the room for days once the pipe is fixed.

New flooring over a wet slab fails, and the warranty goes with it

With clear direction, adhesives release, laminate cores swell and wood cups when the slab beneath is still giving up moisture.

The soil under the slab can wash out or swell

For a smoother recovery, continuous water either carries fine soil away or expands clay soils.

Helpful service information

What to know about slab leak damage

For a smoother recovery, start with the short explanation. As the property gets back on track, open a card if you want a little more detail.

What is happening inside the property

For a smoother recovery, in slab on grade construction, water supply lines are commonly run inside or beneath the concrete, historically in soft copper tubing.

Read the explanation

For a smoother recovery, it helps to know what is actually down there. For a smoother recovery, in slab on grade construction, water supply lines are commonly run inside or beneath the concrete, historically in soft copper tubing.

How the next step is decided

For a smoother recovery, a reroute abandons the failed section and runs new pipe overhead or through walls.

Read the explanation

For a smoother recovery, reroute or open the slab is your plumber's decision, and we explain what each one means for our half of the job.

What may change the work

From cleanup toward a fresh start, concrete holds water in a fine pore structure and gives it back gradually.

Read the explanation

As the property gets back on track, drying concrete is a slower science than drying drywall and it needs to be measured rather than assumed.

Help near you

Slab Leak Water Damage near Pollock, MO

Choose your area below, or call (866) 736-0707 and describe what happened.

Common questions

Questions about slab leak damage

What is a slab leak?

With clear direction, it is a leak in a water line that runs inside or beneath the concrete floor of a slab on grade building.

How do I know if I have a slab leak?

For a smoother recovery, look for a warm spot on the floor, or the sound of running water with everything off.

Why is one spot on my floor warm?

For a smoother recovery, because hot water is escaping under the concrete and heating the slab above it.

Do you find the slab leak or does a plumber?

With clear direction, we locate the wet area and narrow the leak location using moisture readings, surface temperature and the pattern of the wet boundary.

Does the slab have to be jackhammered?

For a smoother recovery, not always. For a smoother recovery, many plumbers prefer a reroute, which abandons the failed run and routes new pipe through walls or the attic.

What is a reroute?

With clear direction, it is new pipe run above the slab to replace the failed section underneath it.

Can concrete be dried, or does it have to be replaced?

For a smoother recovery, concrete dries. With clear direction, it just does it slowly, because water sits in the pore structure and comes out over days rather than hours.

Talk with a restoration specialist

Water loss in Pollock, MO?

Describe the source, the impacted rooms, and when you first noticed the damage.

Call (866) 736-0707

Areas we serve

Water-damage help near Pollock, MO

Our guided-recovery team guide you through homes, businesses, and managed properties throughout Pollock, MO and nearby communities.

View the area on Google Maps
Call (866) 736-0707